●  ISO 9001:2015 Certified  ·  BIS Licensed (IS 1180)  ·  Type Tested at CPRI & ERDA  ·  Brand Heritage Since 1970

Home  /  Products  /  Power Transformers

Power Transformers

Sub-station, generator and auto transformers up to 66 kV class, with on-load or off-circuit tap changers — engineered to improve grid stability and network efficiency.

Classic power transformer with conservator and radiator banks Power transformer with on-load tap changer and radiators

Overview

A legacy of excellence in power transformers

Classic power transformers are double-wound units with CRGO cores and liquid-filled insulation — mineral oil or synthetic ester. They are designed to meet the demands of modern transmission and distribution networks and are built to national and international standards.

The range is cost effective and fully compliant, with options to suit varied requirements — from off-circuit tap selection to OLTC with remote tap-change control, AVR and parallel operation. Ratings are engineered to each project; share your MVA rating and voltage ratio for a detailed proposal.

Technical characteristics

Voltage class

Up to 66 kV

Types

Sub-station · Generator · Auto transformers

Tap changing

Off-circuit tap changer / selector, or OLTC with drive mechanism

Cooling

ONAN, ONAF, OFAF, KNAN, KNAF

Insulating fluid

Mineral oil or synthetic ester

Applications

Where they are used

Utility and distribution company sub-stations

Industrial plants with HT incoming supply

Power evacuation from generation and captive plants

Renewable energy and solar generation sites

Infrastructure and EPC projects

Available configurations

Options and accessories

On-load tap changer (OLTC) with drive mechanism

Remote tap-change control (RTCC) panel with AVR

OLTC parallel-operation control

Indoor cable box or outdoor bushing terminations on HV and LV

Conservator, radiators, marshalling box and protective fittings

Manufacturing

20-ton EOT crane bay

Power transformers are built in a dedicated bay served by a 20-ton EOT crane with a 60 ft span.

Testing

Routine, type & special tests

Tests per IS, IEC and IEEE, with impulse and short-circuit tests at NABL-accredited laboratories.

Service

Erection & commissioning

Service engineers manage erection, on-site final testing and energizing.

Related products

You may also need