●  ISO 9001:2015 Certified  ·  BIS Licensed (IS 1180)  ·  Type Tested at CPRI & ERDA  ·  Brand Heritage Since 1970

Home  /  Products  /  Distribution Transformers

Distribution Transformers

Oil cooled, dry type (VPI) and cast resin distribution transformers from 10 kVA to 2500 kVA, up to 36 kV class — designed in-house and built at our Bidadi works.

Row of finished distribution transformers ready for dispatch Batch of distribution transformers ready for dispatch

Overview

The final link between the network and the consumer

A distribution transformer provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in distribution lines to the level used by the customer. Classic distribution transformers are designed for low losses and low noise, and to withstand electrical impulse, thermal and dynamic short-circuit stresses.

Optimum utilization of active materials keeps designs compact, while modern manufacturing techniques deliver cost effectiveness and reliability. Classic is certified by BIS to manufacture oil cooled transformers up to 2500 kVA as per IS 1180 (Part 1): 2014 energy-efficiency levels, and by BEE for star-rated transformers.

Technical characteristics

Rating range

10 kVA to 2500 kVA

Voltage class

Up to 36 kV

Types

Oil cooled · Dry type (VPI) · Cast resin (CRT)

Tap changing

Off-circuit (OCTC) or on-load (OLTC)

Standards & efficiency

IS 1180 (BIS) energy-efficiency levels; BEE star-rated designs

Applications

Where they are used

Electricity supply company (ESCOM) distribution networks

Industrial plants and manufacturing facilities

Commercial complexes, IT parks, hospitals and hotels

Infrastructure and EPC projects

Housing complexes and real-estate developments

Available configurations

Built to your specification

Mineral oil or FR3 natural ester fluid filling for enhanced fire safety

Compact designs with DGPT relay (gas, pressure, temperature and level protection in one device)

Corrugated tank or fin-type radiator construction

Copper or aluminium windings; CRGO cores

Indoor or outdoor installation with cable box or bushing terminations

Variants

Distribution transformer variants

Distribution transformer filled with FR3 natural ester fluid

Filled with FR3 natural ester

Higher fire safety and thermal capability, extended insulation life and environmental benefits.

Distribution transformer fitted with DGPT protection relay

With DGPT protection

Space-saving compact design with gas detection, pressure, oil temperature and level control in one device.

Oil-cooled distribution transformers with conservator tanks

Conventional oil cooled

Proven conservator-type designs with fin radiators for outdoor distribution substations.

Manufacturing

Built in our Bidadi works

CRGO core building, coil winding, vacuum drying, tanking and assembly under one roof.

Testing

Routine tested in-house

Ratio, resistance, losses, impedance and dielectric tests in our own test field.

Service

Installed and supported

Erection, commissioning and after-sales support from our dedicated service team.

Related products

You may also need